Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #9818
    Andrew RobertsAndrew Roberts
    Participant

    Hi everyone,

    I’m a relatively new owner of a Macwester 27, which is currently out of the water for the winter.

    I’ve noticed something that doesn’t look quite right at the bottom of the rudder and wondered whether anyone familiar with the Macwester 27 could offer some advice.

    I’m not familiar with the correct terminology for these parts, so apologies if my description isn’t particularly technical!

    As you’ll see from the attached photographs, there is a vertical metal shaft or pin running through the rudder, which protrudes from the bottom and sits in a metal support beneath it.

    The problem is that the pin appears to be sitting off-centre in the hole, with quite a substantial gap around it. There is also a metal ring or collar around the pin which appears to be loose.

    My questions are:

    1. Is there supposed to be a bush or bearing inside the lower support to keep the pin centred?
    2. Is the loose metal ring part of the original arrangement, or has something come adrift?
    3. Does this look like something that needs repairing, or is some movement and clearance normal?
    4. If it does need repairing, has anyone tackled this before, and is it a relatively straightforward job?

    I’d be particularly interested if anyone has photographs of how this assembly should look on another Macwester 27.

    I’m hoping to establish whether it’s something I can sort out myself while the boat is ashore, or whether it needs more specialist attention.

    Many thanks in advance for any advice!

    You must be logged in to view attachments.

    #9820
    Geoffrey WhiteGeoffrey White
    Keymaster

    My boat is a Macwester 26.

    Following the usual 10 year survey required by my insurers – I’ve had Haston Dee for nearly 35 years – the surveyor found a number of problems. It was only when the local boatyard here in Malta started rectifying things, they found that the rudder was in urgent need of renovation. It was while doing this that we noticed that my rudder, too, was off-centre. They said that this could put a strain on it and so they repositioned it and fitted new stainless steel bushes top and bottom. They had to make them as you probably can’t buy Macwester parts off the shelf.

    My advice is to get the rudder looked at professionally and then you can decide whether it’s something you can do yourself. The work was done on my boat last November so recent experience.

Viewing 2 posts - 1 through 2 (of 2 total)
×
  • You must be logged in to reply to this topic.