- This topic has 1 reply, 2 voices, and was last updated 2 months, 3 weeks ago by
.
-
Posts
-
We are slowly working our way through the to do list on our recently acquired but neglected Macwester 27.
We are replacing the old galvanized T cleats and their rotten wooden pads and want to add new stainless steel fairleads and new cleats , through bolted onto oak pads under deck .
More out of curiosity does anyone have any photos of their foredeck set up especially handed cleats .
Every sailing boat in our boatyard is different but sadly no Macwesters there to compare .
your thoughts and maybe photos would be appreciated .
Hi Tanya
My preference is for a large Samson type post about a foot back from the now roller, a nice round one with a large base. Don’t use wood anywhere- just silicon between the post and the boat and inside either large washers or a matching stainless steel plate, and two fairleads (one each side) fitted in the same way. A decent size cleat will suffice in the middle if you cannot purchase a Samson post but steer clear of galvanised ones or wooden packets as they rot easily.
Have you looked through the technical articles to find pictures or articles that may help?
Chris – Technical Officer
- You must be logged in to reply to this topic.