Forum Replies Created

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • 18th November 2022 at 20:23 in reply to: Mac26 Bilge Keel Damage #5520
    Dominik MünchDominik Münch
    Participant

    Hi Peter,

    I don’t have a clue, if the shoe is original. But nevertheless I have to fix it. I’ve talked to a comrade in our club who is a GRP expert. His advice is to sand down all the “bad” GRP and rebuild it. After that he suggested to mount a new shaped shoe which covers the underside and goes up on the sides for about 5 to 10 cm. This should protect the keels best in our area.

    I hope to get it done till spring to be back in the water end of April. If anyone has different solutions let me know.

    Dom

    18th November 2022 at 20:18 in reply to: Mast Plate #5519
    Dominik MünchDominik Münch
    Participant

    Hi Peter,

    on Mac26 we have a similar opening under the mast plate. I had to use last year to remove our mast plate for renovation.

    Greetings from Germany

    Dom

    27th December 2021 at 10:21 in reply to: Mac26 Exchange window rubber seals #3631
    Dominik MünchDominik Münch
    Participant

    Hi Chris,

    indeed I found a company for tractor parts who sells these kind of seals.

    Thanks for your help. Happy New Year to Linda and you.

    Dominik

    23rd December 2021 at 10:47 in reply to: Mac26 Exchange window rubber seals #3615
    Dominik MünchDominik Münch
    Participant

    Hi Chris,

    thanks for your swift answer. But our front windows have no frames. The seals are on one side stuck at the GRP housing and on the other side they’re holding the acrylic glass. Just like this:

    Window seals example

    Does anyone have an idea?

    Greetings

    Dominik

    13th March 2019 at 20:00 in reply to: Macwester badge #1024
    Dominik MünchDominik Münch
    Participant

    Many thanks Chris

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)