Forum Replies Created
-
Posts
-
I cant say I remember exactly what I used to clean her but sugar soap or bleach with manual agitation is my usual method, I am not a fan of pressure washing deck areas as it usually creates more work than it saves. The laminate actually works really well for a template with the pieces being able to slide you can keep trimming until you are happy with it and then fix them together. Cardboard is ok to get close, but the laminate template made it a single cut and fit job. For the next bulkhead I did use a different method though and will show that when I get the pics together.
Yes, In hindsight I should have lowered the cabin sole when I changed all the stringers to give more headroom but at the time rain would still find its way in so I placed a greater priority on keeping a bilge.
Pic is of what I believe to be a common problem area, I often see this area covered with something in sale pictures of other boats. The problem with mine was the deck fitting for the fresh water tank fill, it was too close to the bulkhead. With the pipe touching the bulkhead, condensation had a route to cause trouble in this corner. I had originally thought the stanchion was the problem but after resealing it the area did not dry up, resulting in this ‘bigger job than I thought’ exploration.
You must be logged in to view attachments.
New bulkhead was cut from the template and offered up to mark for scarfing, I decided to come back past the step in the deck to help maintain its shape, It would have been cleaner looking repair if I had joined it closer to the vertical edge but I did not want to chance it as I already had the mast slackened a little and propped from underneath during the process. I made a bit of a mess with the resin while doing the tabbing which is a shame as there was a nice grain on this face of the ply. Main structural rigidity was restored though and that was the important thing.
You must be logged in to view attachments.
First major job was the galley, It soon became apparent that the bulkhead was shot and needed replacement. I had some leftover laminate and used that to create a template, there were those that laughed thinking I was making the new bulkhead out of laminate. While it was a drawn out process it works well and the material used was only destined for the skip anyway.
You must be logged in to view attachments.
Well there was a lot of cleaning and drying out before I could really get started, this gives an idea of the condition I bought her in. It is nice that she has been rescued but I personally would not buy a project boat again. A good scrub of the topsides and hull had her looking a completely different boat, though that was the easy part.
You must be logged in to view attachments.
