Water system

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #3709
    Charles TilleyCharles Tilley
    Participant

    I have recently bought a Macwester Seaforth 36 and am struggling to make the shower and hot water work.  The galley sink works well with good water pressure.  Any advice would be welcome.  Thanks Charles

    #3710

    Hi Charles

    I am not sure if hot and cold water system was on the option list from new. Perhaps on the very end of production.
    Only advice could be to try to track where the tubes go, and check that there are no valves hidden to isolate part of the circuit. You could try to disconnect under the tap that doesn’t work, and see if it is not a blockage in the tap mechanism?

    #3711
    Kenneth DickensKenneth Dickens
    Participant

    My Seaforth has hot water which works well, but it takes a while with the engine, when plugged into shore power it works s lot faster  but the tank is quite small.

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.